Roof Razor® Snow Rake/Roof Rake Assembly and Use Instructions
Two 7/16 wrenches are required to secure slotted pole to head frame. Assemble
so that trailing edge of the slide is closest to the long end of pole and
that the single hole is opposite the wheels of the head frame.
All other poles are interchangeable in length, however, one pole has a hole
approximately 16 in. from the male end. This pole should always be the 3rd
pole because that is where the bungee is hooked to keep the slide tight.
- Avoid use in windy conditions.
- Keep away from electric wires and antennas.
- This tool is designed to be used while standing on the
Place wheels on bottom portion of roof and push upwards.
Click here to see pictorial of the Roof Razor® Titan Roof Rake in action!
Click here to see a video of the Roof Razor® Titan and Roof Razor® Dynamo Roof Rakes in action!
NOTE: When using the Roof Razor® Roof Rake, the distance from lowest edge of the roof to the ground must be no more that 16 to 18 feet on a ranch or older story-and-a-half house. A two-story colonial style house with the lowest portion at 20 feet or more is too high unless you are in a bucket truck.